Publicidad
Idiomas disponibles
Idiomas disponibles
Note: The use of some oxygen administration
accessories not specified for use with this
oxygen concentrator may impair its performance.
Recommended accessories are reference within this
manual.
Note: To Equipment Provider: The following humidifier
bottles are recommended for use with the NewLife
Oxygen Concentrators:
Part No. HU014-1
Nasal Cannula
Your physician has prescribed either a nasal
cannula, face mask, or other accessories. In most
cases the manufacturer has already connected the
oxygen supply tubing to the nasal cannula, face
mask, or other accessory.
If not, follow the manufacturer's instructions for
proper connection. Connect the oxygen tubing to
the oxygen outlet adapter or humidifier.
Note: To Equipment Provider: The following oxygen
administration accessories are recommended for use
with the NewLife Oxygen Concentrator:
• Nasal Cannula with 7 feet (2.1 m) of tubing (6 LPM
max): Part No. CU002-1
• Oxygen Outlet Adapter (6 LPM max) (Not for use
with Intensity 10 LPM): Part No. F0025-1
• Face Mask with 7 feet (2.1 m) of tubing (10 LPM
Max)*: Part No. MS013-1
• Humidifier Adapter Extension: Part No. HU002-1
• Humidifier Bottle for Intensity models:
Part No. HU014-1
* Face mask should only be used with Intensity 10
models.
NewLife Intensity 10
Note: Ensure the cannula is fully inserted and secure.
You should hear or feel oxygen flow to the prongs of
the nasal cannula. If oxygen does not seem to flow,
first verify that the flowmeter ball is registering a flow.
Then, place the tip of the cannula into a glass of
water; if bubbles come out of the cannula, oxygen is
flowing. If bubbles do not appear, refer to the trouble-
shooting section of this manual.
PN MN239-C4 F | User Manual ENG - 13
Publicidad
