Publicidad
Idiomas disponibles
Idiomas disponibles
B
Connecting the hob to the mains power supply
WARNING:
This hob must be connected to the mains power supply
only by a suitably qualified persol
Before connecting the hob to the mains power supply, check
that:
1. The domestic wiring system is suitable for the power
drawn by the hob.
2. The voltage corresponds to the value given in the rating
plate
3. The power supply cable sections can withstand the load
specified on the rating plate.
To connect the hob to the mains power supply, do not use
adapters, reducers, or branching devices, as they can cause
overheating and fire.
The power supply cable must not touch any hot parts and
must be positioned so that its temperature will not exceed
75˚C at any point.
WARNING:
• Check with an electrician whether the domestic wiring
system is suitable without alterations. Any alterations must
only be made by a qualified electrician.
• The power supply should be connected in compliance
with the relevant standard, or a single-pole circuit breaker.
The method of connection is shown below.
Using the appliance
10
EN
Publicidad
