VALBERG IH 2 TB 007C Instrucciones De Uso página 38

C
Failure
Heating stops
suddenly
during operation
and the display
flashes "u".
Heating zones of the
same side ( Such
as the first and the
second zone ) would
display "u" .
Fan motor sounds
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.
Useful information
Problem
• Pan Type is wrong.
• Pot diameter is too
small.
Cooker has
overheated;
The power board
and the display
board connected
failure;
The display board of
communicate part is
damaged.
The Main board is
damaged.
The fan motor is
damaged.
31
Solution A
Use the proper
pot (refer to the
instruction manual.)
Unit is overheated.
Wait for temperature
to return to normal.
Push "ON/OFF"
button to restart
unit.
Check the
connection.
Replace the display
board.
Replace the power
board.
Replace the fan.
EN
Solution B
Pan detection circuit
is damaged, replace
the power board.