Publicidad
Idiomas disponibles
Idiomas disponibles
B
• Touching the heating zone selection control ,and the indicator next to the key will flash
• Select a heat setting by touching the "-" or "+" control.
- If you don't choose a heat setting within 1 minute, the Induction hob will automatically
switch off. You will need to start again at step 1.
- You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
Finish cooking
• Touching the heating zone selection control that you wish to switch off
Using the appliance
alternately with the heat setting
15
EN
Publicidad
