Publicidad
Idiomas disponibles
Idiomas disponibles
3. Each hob has its own independent slider,
boost, timing operation button, which can
independently operate the power
level/timing function.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed on it.
2. Finish Cooking
1. Touch the slider of the corresponding
burner to the far left, make sure the display
shows "0", after 3s the cooking area is turned off,
and the display shows "-".
Power down
3. Beware of hot surfaces
H/h will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used as
an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
alternately with the heat setting
OR
4. Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within 20
seconds, the Induction hob will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
2. Turn the whole cooktop off by touching the
ON/OFF control.
17
Power up
Power down
V.1
Publicidad
