Publicidad
Idiomas disponibles
Idiomas disponibles
3. Using the Boost Function
Activate the boost function
1. Touch the ON/OFF control. After power on,
the buzzer beeps once, heating zone selection
controls show " - " , indicating that the induction
hob has entered the state of standby mode.
Cancel the Boost function
1. In boost mode, the operation slider will exit
the boost mode, and the gear will be
displayed in the display area.
Note
• The function can work in all cooking zones.
• The cooking zone returns to its original setting after 10 minutes.
• The flex cooking zone returns to its original setting after 5 minutes.
• As the boost function of 1st cooking zone is activated, start 2nd cooking area, and the 1st cooking area will
automatically change to level 9. Vice versa.
• If the original heat setting equals 0, it will return to 9 when boost ends.
4. Flexible Area
• This area can be used as a single zone or as two different zones, accordingly to the cooking needs anytime.
• Flexible area is made of two independent inductors that can be controlled separately. When working as a single
zone, the part that is not covered by cookware is automatically switched off after 8 seconds.
• To grant a correct pan detection and a even heat distribution, the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the cookware is smaller than 21 cm.
- Anywhere with bigger cookware.
2. Touching the boost control "B" , the zone
indicator show "Marquee" and the power reach Max.
2. After the boost operation time reaches, it will
automatically exit the boost mode and return to the
level before entering the boost mode . If the level
before entering the boost mode is 0, it will become
level 9 for operation.
18
V.1
Publicidad
