Publicidad
Idiomas disponibles
Idiomas disponibles
1. When the time is set to 0, it will exit the
level display mode at a fixed time without
operation for 3s.
3. Time decrease button, long press and short
press are effective.
7. Pause
1. When the cooking zones are running, touch the " II " control, all the displays will show " II " and heating by
level 2. At this moment only " II " and "
2. Touch " II " again, the displays show the original setting, and the cooking zones keep on heating.
8. Pan transfer
The pan tranfer function is disabled by default and can be activated or disabled by the following operations, In
the off state, long press the open key tostart the cooktop, in 10 seconds long press LF timing reduction function
key 3s;
If LF digital tube display On, it means open pantransfer function.
If LF digital tube display OF, it means closepan transfer function.
1. The pan transfer function is not enabled bydefault when bunner is in boost mode.
2. After the transfer is confirmed, the timingtime and level will be transferred.
Start LR hob. LR burner running at 9
level
2. Time increase button, long press and short
press are effective.
" control can be operated.
When the power is stable. transfer the
LR cooker to RF
20
4. At the same time, press the timing plus or
minus button for 1s to cancel the timing.
RF burner nib flashing LR burner gear
Blinking
with sound
V.1
Publicidad
