CAMPAGNOLO BORA 2003 FULL CARBON Manual De Uso página 36

• Remove the spoke together with the cable end (A - Fig. 24).
CAUTION!
If necessary, first lift the spoke overlapping the one to be
replaced and, after assembly of the new spoke, make sure it is
returned to exactly the same position.
• Insert the new spoke in the hole in the rim, insert the plate posi-
tioning the longest side longitudinally compared with the rim rota-
tion direction, then tighten the nut (Fig. 25).
WARNING!
When fitting the wheel, check that the plates remain in position
since an incorrectly positioned plate may cause irreparable
damage to the profile of the rim when tensioning the spokes.
This damage could cause the rim to unexpectedly fail, resulting
in an accident, personal injury or death (Fig. 25).
WARNING!
Check that the side of the rim does not show any sign of signi-
ficant wear, damage or deformation on the braking track, which
could cause the rim to unexpectedly break, resulting in an
accident, personal injury or death.
24
A
OK! NO!
25
13