Platform stacker
Help in the event of faults
Service work should only be carried out by authorised specialist staff.
Defective components should only be replaced with original parts.
Please check first of all whether there has been an operating error. You yourself can eliminate some faults.
In the event of after-sales service and when ordering replacement parts give the data set out in the identifi-
cation plate (see page 20).
Fault
Appliance does not become
warm,
indicator light does not come
on.
Appliance becomes warm,
indicator light does not come
on.
Regular inspection and maintenance of the appliance prevent disruptions to operation and ensure safety.
Inspection and maintenance intervals depend upon the use of the appliance. Consult your dealer's after-sales
service department.
Technical Data
Test mark
Water spray protection
Number of crockery stacks
Crockery size
Inner lining of well
Stacking platform
Stack height without cover
Stack height with cover
Capacity
Heating
Thermostat setting
Maximum crockery temperature
Temperature regulation
Heat insulation
Electrical connection
Connected load
Chassis
Nett weight
Appliance weight with maximum
loading
Permitted total weight
43.3000.6
Possible cause
Defective fuse at the building
end.
ON/OFF switch defective.
Mains connection cable or
mains plug defective.
Indicator light defective.
Circuit defective.
BD / 60-60
up to 16, depending upon crockery size
Ø 14 - 30 cm, or edge length 16 x 16 bis 27 x 27 cm
all-round vertical plastic-coated struts
chrome nickel steel platform 600 x 600 mm
see «Calculating the stacker capacity», page 28
4 castors, of which 2 with total locks, Ø 125 mm
48 kg
300 kg
300 kg
Action
Check fuse and repair if need be.
Disconnect appliance from the mains and
have it checked and repaired if need be by
authorised specialist staff.
Take appliance out of operation and have it
checked and repaired if need be by author-
ised specialist staff.
BD / 60-60 K
-
565 mm
680 mm
-
-
-
-
-
-
-
47 kg
300 kg
300 kg
BDUH / 60-60/4-S
IPX5
Power module
20 -120 °C
80 °C
continuous
ceramic mat
230 V 1N AC 50 Hz
2,0 kW
78 kg
300 kg
300 kg
33