Descargar Imprimir esta página

Dreame D9 Max Gen 2 Manual De Usuario página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47
Preparing Your Home
EN
Before cleaning, please move away unstable, fragile, valuable or dangerous
items, and clean up cables, cloths, toys, hard objects and sharp objects on the
ground to avoid being entangled, scratched or knocked over by the robot and
causing losses.
Open the door of the room to be cleaned, and put the furniture in its
proper place to leave more space.
Note:
· When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
· Do not vacuum hard objects like stones, steel balls and toy parts, or sharp objects like construction waste, broken glass and nails, otherwise the ground may be scratched.
8
Before cleaning, place a physical barrier at the edge of the stairs and
sofa to ensure secure and smooth operation of the robot.
To prevent the robot from not recognizing areas that need to be cleaned,
do not stand in front of the robot, or in a threshold, hallway, or narrow
places.
Before Use
1. Place the Charging Dock and Connect to an
Electrical Outlet
Place the charging dock on level ground against the wall. Insert the power cord
into the charging dock and plug it into the socket.
Place the charging dock in a location that is as open as possible with a good
Wi-Fi signal.
> 0.5 m
> 0.5 m
> 1.5 m
Note:
· Remove any objects that are closer than 1.5 m from the front and 0.5 m from
either side of the charging dock.
· Do not place the charging dock in an area with direct sunlight or where other
objects might block the signal, as this may hinder the robot from returning to
the charging dock.
2. Remove the Protections
3. Install the Side Brush
Side Brush
Click
Side Brush Clip
Note: Install the side brush until it clicks into place.
4. Charge the Robot
When placing the robot, align the charging contacts at the bottom of the robot
with the charging contacts of the charging dock, and the robot will automatically
turn on and start charging.
Note: It is recommended to fully charge your robot before first time use.
EN
9

Publicidad

loading

Este manual también es adecuado para:

Rld34gaRcs0