Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
EN
Dust Box
1. Open the robot's cover and press the clip to remove the dust box.
2. Open the dust box cover and empty the dust box as shown in the diagram.
14
Filter
1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects
to prevent damage.
2. Rinse the dust box and filter with clean water and dry them completely before
reinstalling.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
Note:
· Rinse the dust box and filter with clean water only. Do not use any detergent.
· Use the dust box and filter only when they are completely dry.
Routine Maintenance
Mopping Module
1. Slide the two release clips on the side of the water tank, remove the
mopping module, and pull the mop pad off the mopping module.
2. Pour out the water in the tank. Clean the tank with water only and leave
it to air dry before reinstalling.
Note: Do not directly expose the water tank to sunlight.
3. Clean the mop pad with water only and leave it to air dry before reinstalling.
11
12
1
10
2
24 hrs
9
3
8
4
7
5
6
Note: Remove the mop pad from the mopping module before cleaning it, and
make sure dirty water does not flow back into the water outlet to avoid clogging.
4. If slow water flow occurs, or the water volume is not well-distributed, clean
the air hole in the cover of the water tank.
EN
15
Publicidad
