CANDY HOOVER Haier HAIFB53IRCS Manual Del Usuario página 10

3. BEFORE STARTING
3.1 GENERAL INFORMATION
Before you begin, is important to know: all functions of this hob are designed in order to comply with
the most stringent safety regulations.
For this reason:
Some functions will be activated, or will be automatically deactivated in absence f pots on the
burners or when they are not correctly positioned.
In other cases, functions will be automatically deactivated after a few seconds when it requires
more then one step (e.g. "SWITCHING ON/OFF THE HOB" without "SELECT THE COOKING
ZONE".
In case of longtime use, the appliance may not immediately shut down, even with all the cooking
zones off, because it is in the cooling phase; the H symbol appears on the cooking zone display until it
is cooled.
Safe activation: the product is activated with the presence of pots on the cooking one. The heating
process does not start or is interrupted if there are no pots or if these are removed.
Pot detector: after the hob is switched on, the product automatically detects the presence of pots on
the cooking zones, even before activating them.
Safety shut down: for safety reasons, each cooking zone has a maximum operating time,
with depends of the maximum power level set (p.13).
3.2. POWER MANAGEMENT
When product is first used, the hob is set to maximum reachable power. Different power limits can
be chosen accordingly with home main supply system by using power management function.
How to set the power management
It is possible to set a maximum power absorption level for the Induction hob, choosing up to
different power ranges.
Induction hobs are able to limit themselves automatically in order to work at lower power level, to
avoid the risk of overloading.
To enter Power Managemet Function:
Turn on the hob, then press at the same time
The timer indicator will show "P8" which means power level 8. The default mode is on 7.4 kW.
To switch to another level
Scroll left and right the slider to change the power management level.
There are 8 power levels, from "P1" to "P8". The timer indicator will show one of them:
P1 P2
2kW 2,5kW
P3 P4
3kW 3,5kW
10
and .
P5 P6
4,5kW 5,5kW
P7 P8
6,8kW 7,4kW