Confirmation and Exit Power Management Function
For confirmation, turn off the hob. The power level will be saved automatically. Selected value is
permanently stored and remain even after power down of the main suplly.
To change the power level repeat the operations described above.
NOTE: depending on the power management selection, some poer levels and functions of the
cooking zones could be automatically limitd not to exceed the selected value. In particular, in case of
a power management level set less than 4,5kw, Boost function, Varycook and some cooking
preparations with the app, could not be selected.
In partiular last power level selection can be refused/adjusted according with the available amount
of residual power from the previous setting.
3.3. CHOOSING THE RIGHT COOKWARE
3.3.1. Characteristics of the cookware
Use only pots with the induction symbol.
Only pots with a perfectly flat bottom. Otherwise, the following situations may occur:
- Not pot detection;
- Low performance;
- Unwanted noise.
Only pots with a smooth base, to avoid scratching the hob surface;
NOTE: avoid a much as possible moving pot operations on the glass surface just to minimize
scratches.
Magnet test
Induction cooking uses magnetism to generate heat; pots must therefore contain iron. If you
already have a cookware you can check if the material is magnetic by using a magnet. Pots are
suitable if they are magnetically attracted by the magnet.
Cookwares made from the following materials are not suitable: pure stainless steel, aluminium or
cropper without a magnetic base, glass, wood, porcelain, ceramic, earthenware.
3.3.2 Higher quality cookwares
All cookwares with the induction symbol are generally accepted.
Depending on the type of bottom, however, the behavior may vary.
In partiular last power level selection can be refused/adjusted
according with the available amount of residual power from the
previous setting.
When using large cookware with a smaller ferromagnetic element,
only the ferromagnetic element heats up. Consequently, heat might not be uniformly distributed.
3.3.3. Dimension & placement
Always use the cooking zone that best matches the bottom diameter of the pan.
Place the pot making sure it is well centered in the cooking area.
11