Dreame D10 Plus Gen 2 Manual De Usuario página 10

How to Use
EN
3. Align the mopping module as indicated by the arrow, then slide it into
the back of the robot until it clicks into place. Press the button
Dreamehome app to start cleaning.
Click
Click
Note:
· It is not recommended to use the mopping function on carpets.
· Use the app to adjust the water flow as required.
16
4. When the robot finishes a cleaning task and returns to the base station,
remove the mopping module and wash the mop pad in time. To remove the
or use the
water tank, slide the two release clips on the side of it to take it out.
Note: When the robot is charging or not in use, remove the mopping
module, pour out all the remaining water in the water tank, and clean the
mop pad to prevent mildew or odors.
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Maintenance
Part Replacement Period
Frequency
Mop pad After each use Every 3 to 6 months
Main Brush Every 6 to 12 months
Side Brush Once every 2 weeks
Every 3 to 6 months
Dust box's filter
Base station's
signaling area
Base station's
charging contacts
Base station's
Once every month /
auto-empty vents
Laser Distance Sensor
(LDS)
Robot's charging
contacts
Note: The replacement frequency will depend on your usage of the robot. If an exception occurs due to special circumstances, the parts should be replaced.
Maintenance
Part Replacement Period
Frequency
Robot's auto-empty vents
Bumper
Omnidirectional wheel
Once every month
Return-to-Base Sensor
/
Cliff sensors
Bottom of the robot
Dust box
Clean it as needed
Water Tank
Dust bag / Every 2 to 4 months
EN
17