Dreame D10 Plus Gen 2 Manual De Usuario página 8

Before Use
EN
4. Charge the Robot
When placing the robot, align the charging contacts at the bottom of the
robot with the charging contacts of the base station, and the robot will
automatically turn on and start charging.
Note: It is recommended to fully charge your robot before first time use.
12
Connecting with Dreamehome App
1. Download Dreamehome App
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
QR Code
Note:
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may differ
from the directions in this manual. Please follow the instructions based on
the current app version.
2. Add Device
Open the Dreamehome app, tap in the upper right corner, and scan
the same QR code on the robot again to add the device. Please follow the
prompts to finish the Wi-Fi connection.
Note: If you want to reset Wi-Fi, repeat step 2 and then follow the prompts
to finish the Wi-Fi connection.
Wi-Fi Indicator
· Blinking slowly: To be connected
· Blinking quickly: Connecting
· On: Wi-Fi connected
EN
13