Let the appliance operate for 15 min.
4. Set the function
temperature.
Let the appliance operate for 15 min.
Turn off the appliance and wait until it is cold.
The appliance can emit an odour and smoke.
Make sure that the airflow in the room is
sufficient.
5.6 Setting: Water Hardness
When you connect the appliance to the mains
you have to set the water hardness level.
Use the test paper supplied with the steam
set.
1. Put the test paper into water for about 1
sec. Do not put the test paper under
running water.
2. Shake the test paper to remove any
remaining water.
Water hardness
Level
(dH)
1
0 - 7
2
8 - 14
3
15 - 21
4
≥ 22
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Heating functions
STANDARD
Grill
To grill thin pieces of food and to toast
bread.
10
ENGLISH
. Set the maximum
Test paper
3. After 1 min, check water hardness with
the table below.
4. Set the water hardness level: Menu /
Settings / Setup / Water Hardness.
The colours of the test paper continue to
change. Check the water hardness within 1
min after testing.
You can change the water hardness level in
the menu: Settings / Setup / Water Hardness.
The table shows water hardness range (dH)
with the corresponding level of Calcium
deposit and the water classification. Adjust
the water hardness level according to the
table.
When the tap water hardness level is 4, fill
the water drawer with still bottled water.
Calcium depos‐
Calcium de‐
it (mmol/l)
posit (mg/l)
0 - 1.3
1.4 - 2.5
2.6 - 3.8
≥ 3.9
Turbo Grilling
To roast large meat joints or poultry with
bones on one shelf position. To bake gra‐
tins and to brown.
True Fan Cooking
To bake on up to three shelf positions at
the same time and to dry food. Set the
temperature 20 - 40 °C lower than for Con‐
ventional Cooking.
Frozen Foods
Perfect for ready meals (e.g. french fries,
croquettes or spring rolls).
Water classifi‐
cation
0 - 50
soft
51 - 100
moderately hard
101 - 150
hard
≥ 151
very hard