Publicidad
Idiomas disponibles
Idiomas disponibles
A
Screw
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the hob electronics.
3. The induction hotplate shall be installed such that better heat radiation can be ensured
to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.Product installation to keep the installation surface smooth, can not have foreign bodies
(such as sand), in order to prevent the use of the force caused by the crystal plate broken!
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only
by a suitably qualified person. Before connecting the hob to
the mains power supply, check that:
the domestic wiring system is suitable for the power drawn by the hob.
1.
the voltage corresponds to the value given in the rating plate
2.
the power supply cable sections can withstand the load specified on the rating plate.
3.
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable
without alterations. Any alterations must only be made by a qualified
electrician.
B
C
Bracket
Screw hole
D
Bottom case
-161-
Publicidad
