Publicidad
Idiomas disponibles
Idiomas disponibles
4 Harness Attachment
PFL Materials, Web
Component
Case
Drum
Chassis, Pawl, Swivel Assembly, Main Spring
Lifeline
Connectors
PFL Materials, Cable
Component
Case
Drum
Chassis, Pawl, Swivel Assembly, Main Spring
Lifeline
Connectors
4
Harness Attachment
WARNING!
DO NOT rely on feel or sound to verify proper connector engagement. Ensure the connector is closed before use.
Failure to follow this warning can result in serious personal injury or death.
4.1
Attach V-TEC Single Leg PFL to Harness
A V-TEC PFL may be connected to an approved full body harness by feeding the carabiner through the back D-ring of the
harness. In these applications, the snaphook is connected to a suitable anchorage with the appropriate connecting
hardware.
4.2
Attach V-TEC Twin Leg PFLs to Harness with V-TEC TwinLink Connector (Web PFLs Only)
A V-TEC TwinLink connector can be used to connect two V-TEC PFLs side-by-side on a full body harness just below the
rear D-Ring or through the PFL tunnel. The V-TEC TwinLink connector shall only be used to connect a maximum of two V-
TEC PFLs to the harness.*
* The V-TEC TwinLink (minus the clip) may be used to attach directly to a full body harness D-ring.
1. If harness has PFL tunnel—
use PFL tunnel as connection
point.
9
Standard Material
Polycarbonate
Stainless Steel / Nylon
Stainless Steel
2/3" (17 mm) wide / 0.06" (1.4 mm) thick HMPE
Steel OR Aluminum
Standard Material
Polycarbonate
Aluminum / Nylon
Stainless Steel
5mm DIA Galvanized Steel Cable
Steel OR Aluminum
2. Unclip plastic divider on V-TEC TwinLink connector. Rotate, lift, and twist
gate on carabiner. Push gate inward to open carabiner.
V-TEC® PFL
US
Publicidad
