Removing The Sheave Drum; Removing The Spiral Spring - SELVA MARINE Manta 40 Manual De Servicio

POWR
1
3
4
5
2
RECOIL STARTER
a
1

REMOVING THE SHEAVE DRUM

Remove:
• Sheave drum
Turn the sheave drum clockwise until
the spiral spring is free.
Removing steps
(1) Release the lock.
(2) Pull out the starter rope and make it
hooked by the cutaway
sheave drum.
(3) Turn the sheave drum clockwise.
(4) Take off the starter rope from the starter
2
handle .
(5) Remove bolts
pawl spring
NOTE:
• Turn the sheave drum so that the cut-
away on the outer surface of the sheave
drum faces toward the starter handle.
• Pass the starter rope through the
a
cutaway
WARNING
When removing the sheave drum, be sure
to make it slow and steady to prevent the
spiral spring from popping up at you.

REMOVING THE SPIRAL SPRING

Remove:
• Spiral spring
WARNING
Be careful so that the spiral spring does not
pop out when removing it. Remove it by
allowing it out one turn of the winding
each time.
5-8
1
a
3
, drive plate
5
, and sheave drum
.
E
on the
4
, drive
1
.