Publicidad
–
+
ELEC
POWER TRIM AND TILT MOTOR
a
CHECKING THE MOTOR
1. Check:
•
Commutator
Dirt → Clean with 600 grit sandpa-
per.
2. Check:
•
Segment undercut
Obstruction → Clean.
NOTE:
Remove all metal particles with compre-
ssed air.
3. Measure:
•
Commutator diameter
Out of specification → Replace.
Commutator diameter limit
15.5 mm (0.61 in)
4. Measure:
•
Armature coil continuity
Out of specification → Replace.
Armature coil continuity
Commutator segments
Segment - laminations
Segment - shaft
8-38
E
a
Continuity
No continuity
No continuity
Publicidad
Capítulos
