3.2. INSTALLATION
- Remove the filter unit from the packaging
- Secure the filter unit to the tyre changer frame using
the 2 screws (Fig. 7)
- Connect the pipes to the respective unions (Fig.7)
- Secure the lifter to the lifter
support (optional) with the
3 screws and connect the 2
pipes with the unions (Fig.8)
- Adjust the microswitch so it is actuated correctly when
the lifter is lowered
WARNING: The adjustment must permit the proper
operation of the microswitch without damaging it.
112
Artiglio Master J Operator manual
7
8
9
10