Wheel Loading - Corghi Master J Manual De Uso

High performance wheels (asymmetric curvature) -
Fig. 28C some European wheels have rims with a very
pronounced curvature C, except in the area of the valve
hole A where the curvature is less pronounced B. On
these wheels the bead must first be broken in the area
of the valve hole, on both the top and bottom sides.
Wheels with pressure sensor - Fig.28D. To work cor-
rectly on these wheels and avoid damaging the sensor
(which can be incorporated in the valve, secured to
the belt, glued inside the tyre, etc.) suitable mount-
ing/demounting procedures must be observed (refer
to "Approved mounting/demounting procedure for
runflat and UHP tyres").
Remove the old weights from the rim before starting work operations.

6.4. WHEEL LOADING

Only press the lift pedals during the wheel loading/unloading phases.
Never press them during other work phases!
- Load the wheel onto the lifter
126
WARNING
ATTENZIONE
Artiglio Master J Operator manual
A
B
A
C
28C
B
C
28D
29