Mounting - Corghi Master J Manual De Uso

6.10. MOUNTING

Always check that the tyre/rim combination is correct in terms of compatibility (tube-
less tyre on tubeless rim; tube type tyre on tube type rim) and geometrical size (keying
diameter, cross-section width, off-set and shoulder profile) before mounting.
Also check that rims are not deformed, that their fixing holes have not become oval, that
they are not scaled or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
1 - Carefully lubricate the sides of the tyre along the entire
circumference of the bottom and top bead (Fig.38).
2 - Operate the control
the work area.
3 - The tool is already positioned at the correct height for
mounting the first bead, (Fig. 38B), manually adjust the
tyre so that the upper shoulder of the rim passes the
lower bead and goes into the well (Fig. 38A -38B).
4 - Keep pressed down slightly the section of the tyre with
the lower bead not yet inserted in the rim and turn the
turntable
5 - Operate the lever
the tool head to the upper work area to
mount the upper bead.
Artiglio Master J Operator manual
WARNING
to remove the disc from
.
to move
38
EN
38A
38B
137