Position the bead pressing tool in the correct rest posi-
tion so that it does not interfere with the work area.
6.11. APPROVED UHP and RUN FLAT TYRE DEMOUNTING
AND MOUNTING PROCEDURE
For this type of tyre please refer to the instructions in the manual prepared by WDK
(German Tyre Industry Association).
6.12. TYRE INFLATION
6.12.a. SAFETY REGULATIONS
Check that both the upper and lower beads and the rim
bead seat have been suitably lubricated with paste ap-
propriate for mounting.
Safety goggles with plain lenses and safety footwear must
be worn.
Clamp the rim on the turntable during inflation.
Remove the valve core if it has not already been re-
moved.
Connect the inflation line to the valve.
140
WARNING
RISK OF EXPLOSION
Never exceed the pressure recommended by the tyre
manufacturer. Never mount tyres on rims with a differ-
ent diameter.
An exploding tyre can cause personal injury or death.
DANGER
Artiglio Master J Operator manual
39