Standard Accessories; Optional Accessories; General Conditions Of Use - Mondolfo Ferro MT 3800 LASER Manual De Uso

STANDARD ACCESSORIES

The following parts are supplied together with the
machine.
Weight pliers
Calliper for wheel width measurement
Sliding flange holder kit
Calibration weight
Wheel balancer power supply cable
Monitor power supply cable
kit 4 cones
Wheel fixing cap protection
Spacer cap
Wheel fixing cap
C VERSION
C hub
C locking device
C hub key
STD VERSION
Threaded hub
Hexagon wrench, size 10
Wheel fixing quick ring nut

OPTIONAL ACCESSORIES

Please refer to relevant accessories catalogue.
54
GENERAL CONDITIONS
OF USE
The equipment is intended for professional
use only.
WARNING
Only one operator at a time can work with
the machine.
The wheel balancers described in this manual
must be used exclusively to measure the extent
and position of car wheel unbalances, within the
limits specified in the Technical specification
section. Furthermore, models equipped with
motors must be provided with a suitable guard,
fitted with a safety device, which must be lowered
during the spin operation.
WARNING
Any use of the machine other than the de-
scribed use is to be considered as improper
and unreasonable.
CAUTION
Do not start the machine without the wheel
locking equipment.
MT 3800 LASER - Operator's manual
12