Descargar Imprimir esta página

Mondolfo Ferro MT 3800 LASER Manual De Uso página 74

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

enabled if it is in the following configuration:
- Press the Exit button to save the setting and
exit
.
The selected configuration is displayed on the
status bar in the working environment.
Unbalance rounding-off
configuration
Sets the unbalance rounding-off to grams x1
or grams x5, or, if set to ounces, to oz x 1/4
or oz x 1/10, with which the unbalance values
are displayed.
Select the unbalance rounding-off
-
icon.
-
The following icons are displayed:
Set grams x1; displays the unbalance values
gram by gram.
Set grams x 5; displays the unbalance values
5 grams by 5 grams.
If the unit of measurement is ounces:
Set tenths of an ounce; displays the unbalance
values in tenths of an ounce.
Set fourths of an ounce; displays the unbalance
values in quarters of an ounce.
Press the the Kis knob or ENTER button
-
to select the icon desired.
Press the Exit button to save the setting
-
and exit
74
.
Unbalance unit of measurement
(g/oz) configuration
Sets the unit of measurement to grams or ounces.
After the list of the setting programmes is
displayed, proceed as follows:
Select the unbalance unit of measurement
-
icon
.
-
The following icons are displayed:
g; displays the unbalance values in grams.
oz; displays the unbalance values in ounces.
-
Press the the Kis knob or ENTER button
to select the icon desired.
Press the Exit button to save the setting
-
and exit
After selecting, the new setting is saved and the
unbalance image is displayed again.
Preferred program configuration
Allows two preferred icons to be set on the
main icon bar.
After the list of the configuration programmes
is displayed, proceed as follows:
Select the preferred programmes icon
-
.
-
All the utility and balancing programmes
icons are displayed.
-
Select the two programmes to be displayed
in the main window by using the Kis knob
or ENTER button
Press the Exit button to save the setting
-
and exit
MT 3800 LASER - Operator's manual
.
.
.

Publicidad

loading

Productos relacionados para Mondolfo Ferro MT 3800 LASER