Fast Idle Lever; Emergency Stop Switch - TOHATSU BFT 60A Manual Del Propietário

CONTROLS AND FEATURES (R type)

Fast Idle Lever

The fast idle lever is only needed for
starting carbureted outboard models.
The BFT60A and BFW60A models
use programmed fuel injection so,
this lever will not be needed for
starting.
After the engine starts and if the
outside temperature is below 5°C
(41°F), the fast idle lever can be used
to accelerate engine warm up.
28
REMOTE
CONTROL LEVER
NEUTRAL
MAXIMUM
FAST IDLE
FAST IDLE LEVER
The fast idle lever will not move
unless the remote control lever is in
the NEUTRAL position. Conversely,
the remote control lever will not
move unless the fast idle lever is in
the lowest position.
Lower the fast idle lever to the lowest
position to decrease the fast idle.

Emergency Stop Switch

LOWEST
STOP
POSITION
EMERGENCY STOP SWITCH
Press the emergency stop switch to
stop the engine.