Q UI C KIE PU LS E
G. CENTER MOUNT HANGER ADJUSTMENT
(ASAP Seating only)
16
1. Removal
a. Remove the four screws (A) and slide the footrest out.
17
2. Height Adjustment
a. Remove the six securing screws (B).
b. Move footplate to desired height.
c. Re-install screws (B) through desired holes.
3. Calf pad Adjustment
a. Remove the two securing screws (C).
b. Move Calf Pads to desired height.
c. Re-install screws (C) through adjusted holes.
H. DUAL-POST HEIGHT-ADJUSTABLE ARMRESTS
FIXED HEIGHT STANDARD
The dual-post flip-back armrest can be used as either a flip-back armrest or a removable
armrest.
1. Installing Armrest
a. Insert front and rear posts into armrest receivers.
b. Engage levers (D and E) to secure armrest.
2. Set-up for Flip-back Operation
a. Disengage lever (D) so front post is able to come free.
b. Armrest now has the ability to be flipped back without removal.
3. Set-up for Removal
a. Disengage levers (D and E) so front and rear posts are able to come free.
b. Armrest can now be easily removed for transferring.
4. Height-Adjustment (option)
a. Release the upper securing lever (F).
b. Set at desired height
c. Return securing lever to locked position.
d. Move armrest up or down to allow armrest to snap into place
119832Rev. D
18
19
16
17
18
,
(Option)
18
VIII. SET-UP, ADJUSTMENT, AND USE
F
16
17
18
19
E