TOHATSU MFS 40A Manual Del Propietário página 52

4. For safety, set the tilt stopper into the
set- up position, although the outboard
motor is kept in the tilt up position after
the lock lever is moved (DOWN) to
"Lock" position.
ENOM00067-A
Tilt down
1. Move (UP) lock lever to "Free" position.
2. Release the tilt stopper from the set-up
position while slightly tilting up out-
board motor.
3. Release outboard motor down to
thrust rod.
4. Move (DOWN) lock lever to "Lock"
position after the outboard motor is
completely tilted down.
1. Free position
2. Lock position
1
1. Tilt stopper
ENOM00069-A
Power Trim & Tilt type
Tilt up
1. Operate the Power Trim & Tilt switch
2. Lock the tilt with the Tilt stopper after
Tilt down
1. Release the tilt stopper from the set-up
2. Operate the Power Trim & Tilt switch
1 1
2 2
ENOF00064-A
1. Tilt stopper
ENOF00889-0
ENGINE OPERATION
and tilt the outboard motor up.
the outboard motor has been tilted up
position while slightly tilting up out-
board motor.
and tilt the outboard motor down until
the motor touches to the thrust rod.
UP
DN
1
51
UP
DN
ENOF00067-A
ENOF00067-0
ENOF00890-0