Oil Filter Replacement; Fuel Filters And Fuel Tank Cleaning - TOHATSU MFS 40A Manual Del Propietário

70
INSPECTION AND MAINTENANCE
ENOM00092-A

Oil filter replacement

ENOW00091-0
CAUTION
You may be injured due to high engine tem-
peratures if you fill engine oil just after
stopping. Changing engine oil should be
done after the engine has been cooled.
1. Drain oil from the engine.
2. Place a rag or towel below the oil filter
to absorb any spilled oil.
3. Unscrew old filter by turning the filter to
counter clockwise.
4. Clean the mounting base. Apply film of
clean oil to O-ring.
Do not use grease.
Install oil filter and tighten it to specified
torque by using oil filter wrench.
Oil filter torque:
18 Nm (13 ft lb, 1.8 kgf
-
ENOW00926-0
CAUTION
Wipe off engine oil well immediately if
spilled and dispose of it in accordance with
local fire prevention and environment pro-
tection regulations.
ENON00028-A
Note
If a torque-wrench is not available when you
are fitting a oil filter, a good estimate of the
correct torque is 3/4 to 1 a turn past finger-
tight. Have the oil filter adjusted to the cor-
rect torque as soon as possible with a
torque-wrench.
m)
-
1. Oil filter wrench
P/N 3AC-99090-0
P/N 3AC99090M
(US. CANADA Only)
1
2
1. Oil filter
2. Fuel filter
ENOM00093-A

Fuel filters and fuel tank cleaning

Fuel filters are provided inside the fuel tank
and engine.
ENOW00093-0
WARNING
Gasoline and its vapors are very flammable
and can be explosive.
Do not start this procedure while engine
is operating or hot even after stopping it.
Place fuel filter away from every source
of ignition such as sparks or open
flames.
Wipe off gasoline well immediately if
spilled.
1
ENOF00094-0
ENOF00925-0