Electrical Connections - Unox ChefTop XVC 055 Manual De Instrucciones

Electrical connections

Warning
Connection to the electricity mains must be carried out in compliance with current regulations.
The appliance must be positioned so that the power plug is accessible (for appliances fitted with Schuko plugs).
Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
We recommed the use of a safety switch for fault currents.
During appliance operation, the power supply voltage should not deviate from the nominal voltage value
specified on the appliance rating plate.
Caution!
Electrical connections must be performed by technicians registered with
by law for the country in which the appliance is installed.
and apply the regulations relating to the safety of repaired products and safety in the workplace. In light of the
above information, UNOX accepts no responsibility for any situation resulting from work carried out in an
unprofessional manner, or from the incorrect intepretation or application of regulations.
Caution!
Observe the colour coding of the wires. Incorrect connection may lead to electric shocks.
Incorrect connection may damage the appliance.
Wire colour coding:
Yellow/green = protection (earth) wire
Blue = neutral wire
Brown, grey or black = phase L1, L2, L3
For gas-powered appliances:
Caution!
Observe the electrical connection poles.
If the poles are inverted, the burner will not work.
Caution!
Always observe local standards and legislation.
English
the relevant authorities as required
These technicians must, nevertheless, be aware of
42