Machine Description; Using The Machine; Main Parts; Technical Specifi Cations - BIANCHI VENDING BVM 348 Manual De Uso

3.

MACHINE DESCRIPTION

3.1.

Using the Machine

Your purchased machine for professional use is suitable for producing coff ee, hot water and
steam.
The above-mentioned products can only be produced as per the techniques and operations de-
scribed in this manual.
3.2.

Main Parts

The machine parts may diff er depending on the purchased model. Available models are as fol-
lows:
Fig.01 = Lucia lever model - 3 groups
Fig.02 = Lucia lever model - 2 groups
Fig.03 = Lucia dose model - 2 groups
Fig.04 = Lucia dose model - 3 groups
The list features all parts that may be found in the diff erent models; not all
components are present in both versions.
A LEFT steam knob
B LEFT steam spout
C Power button
D Boiler resistance light indicator
E Hot water dispensing button (only lever model)
F Cup-warming surface switch on button
G Water spout
H Brew group
(variable in number depending on the machine - please refer to technical data sheet)
I Brewing device
I-1 Brewing lever (one for each group, only in the lever model)
I-2 Electronic control panel (one for each group, only in the dose model)
L Surface to store and warm cups
M Transparent plastic protection to store cups.
N Pump pressure gauge
O Boiler pressure gauge
P Drip tray with grill
Q RIGHT steam knob
R RIGHT steam spout
S Boiler water level indicator
3.3. Technical Specifi cations
Here are the technical data and specifi cations.
Model
Sizes (H x L x D) - (mm)
Weight (kg) (machine empty)
Maximum power consumption (W)
See the technical specifi cations plate on the side of the
Operating voltage (V)
Operating conditions
Coff ee brew group number
Boiler capacity (Litres)
Pump pressure
Water network pressure
Note: The manufacturer reserves the right to make any modifi cations to
the machine without any prior notice.
Warning! Any accessory modifi cation and/or addition must be explicitly
approved and implemented by the Manufacturer.
www.vendival.com
Lucia 2 Groups Lucia 3 Groups
445 x 760 x 605 445 x 1,000 x 605
64 80
machine
Temperature (Min. 10°C - Max. 40°C)
Humidity (below 90%)
2 3
12 21
Max 1.5 MPA (15 bar) Max 1.5 MPA (15 bar)
Min 0.15 MPA (1.5 bar)
Max 0.8 MPA (8 bar)
3.4.

Standard Accessories

Listed below are the standard accessories coming with the machine to allow its correct opera-
tion.
Accessory
Filter holder - 2 servings (Fig.07)
Filter holder - 1 serving (Fig.08)
Filter holder - 2 servings (Fig.07)
Filter holder - 1 serving (Fig.08)
Blind fi lter (Fig.11)
Drain tube (Fig.10)
Filling tube (Fig.05)
Electrical connection cable (Fig.09)
3.5.

Mechanical Protections

- Comprehensive protective panelling of parts subject to heat and to the steam- and hot
water-producing equipment.
- Working surface featuring a grill and a water drip basin.
- Water circuit expansion valve and boiler safety valve.
- Check-valve for the water circuit to avoid any refl ux in the supply network.
3.6.

Electrical Protections

- Low tension keyboard keys.
- Boiler resistance overheat bulb.
- Electronic board fuse.
3.7.

Vibrations

All machines are equipped with vibration-free feet. In standard working conditions, no vibrations
harmful to operator and environment are produced.
15
Telf. 902 07 07 59 - Whatsapp 615 35 50 96
18
ENGLISH
Lucia 2 Groups Lucia 3 Groups
no. 2 no. 3
no. 1 no. 1
no. 2 no. 3
no. 1 no. 1
no. 2 no. 3
no. 1 no. 1
no. 1 no. 1
no. 1 no. 1