Turbo CREO SL Manual De Usuario página 12

5.6
TURBO
SPORT
ECO
OFF
Plug the button connectors in the junction box ports so the buttons move through the modes as intended for
„
each side. If after testing the buttons the opposite order is preferred, simply switch the plugs in the +/- ports.
Make sure the connectors are fully inserted (Fig. 5.6 a).
The (+) and (-) icons on the junction indicate the button function. Make sure to connect the
connectors to the corresponding ports.
Connect the junction port connector to the TCU (Fig. 5.6 b).
„
5.7
1
Store all extra cable inside the frame.
Insert the junction port and TCU assembly into the top tube through the TCU top tube cutout (Fig. 5.7). Secure
„
the junction port to the inside of the frame using the supplied adhesive tape.
5.8
Replace the TCU into the frame and torque the bolt to 0.8 Nm (Fig. 5.8).
„
Re-wrap the handlebar tape.
„
CAUTION: If wrapping the bar tape over the button do not wrap the tape too tight as this could
unintentionally activate the buttons when riding.
2 3
A
B
10