Changing Support Modes On The Tcu; Changing Support Modes On The Road Remote - Turbo CREO SL Manual De Usuario

The CREO SL motor offers five different drive settings. TURBO, SPORT, ECO, OFF and SMART CONTROL.
7.3
The drive setting modes are displayed around the S-Button (mode). Pressing the S-Button cycles through the
modes (Fig. 7.3).
The modes will cycle through the three main support modes, starting at SPORT (default). OFF MODE is activated by
a long press of the S-Button (MODE).
The SMART CONTROL indicator light will only be visible on the TCU when the bicycle is connected
to the Mission Control App, and is in SMART CONTROL mode.
7.4
The handlebar remote is included on some CREO SL models (Fig. 7.4) and controls the level of motor support.
(+) BUTTON: Increases the amount of support.
„
(-) BUTTON: Decreases the amount of support.
„
On the remote, after reaching the strongest or weakest mode, the system will not continue to switch. To reduce
„
from TURBO to SPORT to ECO to OFF, you have to press the - button. To increase from OFF to ECO to SPORT
to TURBO, you have to press the + button.
13

7.3. CHANGING SUPPORT MODES ON THE TCU

TURBO
SPORT
ECO
OFF
Bluetooth
SMART
CONTROL

7.4. CHANGING SUPPORT MODES ON THE ROAD REMOTE

+/-
TURBO MODE: Maximum power mode for high
„
speed sections and climbing.
SPORT MODE: Maximum control, with sufficient
„
power on demand.
ECO MODE: Most efficient mode for maximum
„
range while offering good power.
OFF MODE: The motor will not offer any
„
assistance, but the display and lights will still
+
function.
2 SMART CONTROL MODE: The motor, while
„
SEC
pedaling, adjusts the power output based on the
ride parameters determined in the Mission Control
App.
+/-