Fri-Jado STG 5-i Instrucciones De Manejo página 57

5.3.4. Overview
Setting
Change the PIN code
Light
Temperature
Set time
Set date
Set contrast
Time format
Date format
Alarm signal
Pre-heat
Pre-heating margin
Timer function
Set buzzer
Button tone
Clear fault
WWW.FRIJADO.COM
Function and values
Setting the PIN code
Switches the lamp and the quartz emitter on and off. This only applies
when standing still. During the grilling the lamp is always on. The lamp
will go out at the end of the process.
Set the temperature unit.
• °C: degrees Celsius
• °F: degrees Fahrenheit
Set the time indication.
Set the date indication.
Set the contrast of the display.
Set the time format.
• 24 u: 00:00 up to and including 23:59:00
• AM/PM: 00:00 up to and including 12:00:00
Set the date format.
• D/M/Y: day/month/year.
• M/D/Y: month/day/year.
Switch the alarm signal on or off.
Set pre-heating.
no: pre-heating never takes place.
1x: is enabled once after switching on the unit.
yes: pre-heating always takes place.
Set the margin between the pre-heating temperature and the set tempe-
rature of the first step of the program.
This margin can be set between -50 °C and +50 °C or between -90 °F and
+90 °F.
Enables or disables the use of the timer function.
Setting the alarm signal. There are 5 different alarm signals available. This
option is useful when several machine are placed next to each other.
Setting a tone that is heard when a button is pressed.
Reset a fault.
This function is only available when a fault has occurred.
2-EN-23
STG 5 / 7 / 8 - I
9123494 rev. 7 / 2008