Adjust The Door - Fri-Jado STG 5-i Instrucciones De Manejo

1. Remove the plug from the wall socket.
2. Remove the porcelain caps from the lamp by re-
moving the bolts (B).
3. Remove the lamp (C) by removing the bolts (D).
4. Cut the metal connecting strips of the new lamp
to the correct length by cutting off a piece on
both sides. Use the old lamp as an example.
5. Hold the new lamp at the metal connecting strips.
6. Insert the new lamp with the part painted white
facing upward.
7. Mount the bolts (D) to fix the lamp.
8. Mount the porcelain caps (A).
8.3.

Adjust the door

1. Remove the plug from the wall socket.
2. Close the door.
3. Remove the side panel on the hinge side.
4. Support the door on the bottom side and loosen
the nuts (A) of the upper hinge plate half a turn.
5. Position the door such, that the bottom side of the
door when closed runs parallel with the front
below it.
6. Loosen the locking nut (B) of the setscrew.
7. Turn the setting screw (C) clockwise to fix the
position of the door.
8. Tighten the locking nut.
9. Tighten the nuts of the hinge plate.
10. Check the position of the door.
11. Attach the side panel.
WWW.FRIJADO.COM
A
B
2-EN-32
STG 5 / 7 /8 - I
A
D C
B
9123494 - 4/2009
D