Product Description - Ottobock 757M20 Serie Instrucciones De Uso

These instructions for use provide you with important information on the use, adaptation and
handling of the product.
The product may not be transferred to the patient without prior instruction.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
According to the manufacturer (Otto Bock Healthcare Products GmbH), the patient is the operat­
or of the product according to the IEC 60601-1:2005/A1:2012 standard.

2 Product description

2.1 Function
The product is intended to determine the suitability of a patient for using MyoPlus control. The
product cannot be used to control a prosthesis.
The product is a flexible armband that is applied to the end user's sound limbs.
The product measures the patient's control signals and assigns them to the prosthesis move­
ments.
2.2 Design
The product consists of the following components:
1
3 Application
3.1 Indications for use
The product is to be used exclusively for exoprosthetic fittings of the upper limbs.
3.2 Conditions of use
The product is to be used exclusively for the period of end user evaluation and training.
3.3 Indications
• For patients with unilateral and bilateral amputations.
• For patients with transcarpal and transradial amputation.
3.4 Contraindications
• For patients with transhumeral amputation.
• For patients with partial hand amputation.
• For patients with shoulder disarticulation.
3.5 Qualification
Fitting a patient with the product may only be carried out by O&P professionals, therapists or
nursing staff who have been authorised by Ottobock upon completion of a corresponding training
1. Remote electrode dome
2. Textile cuff snap fasteners
3. Charging receptacle and battery
4. Textile cuff
5. Housing for remote electrodes and battery
6. Housing and MyoPlus TR
7. Nameplate
17