Joystick; Joystick Retractable Mount; M.ASap Ii Seating Adjustment - Sunrise Medical Quickie Pulse 6 BC Manual De Instrucciones

E N G L I S H
K. JOYSTICK
(Fig. 14, 15, 16, 17)
Controls:
• LED monochrome joystick and color display joystick (Fig. 15)
Omni Input/Display (Fig. 16)
The Omni is a universal specialty controls interface that accepts signals from many different
types of SIDs (Specialty Input Device) and translates them into commands compatible with
the PG Drives Technology RNET control system.
Mating Connectors
To connect the communication cables: (Fig. 17)
Holding the connector housing, firmly push the connector into its mate until you can
no longer see the yellow plastic. The connectors are secured using a friction system.
To disconnect the communication cables:
Holding the connector housing firmly, pull the connectors apart.
NOTE– Do not hold or pull on the cable. Always grip the connector when connecting and disconnecting.
When the control system is first switched on after a connection, or system component
change, the timer will be displayed while the system checks itself. Then the re-start icon will
be displayed. Switch the control system off and on again to operate,
L. JOYSTICK RETRACTABLE MOUNT
The joystick is mounted with a mechanism which allows the control to be locked in a for-
ward or retracted position using magnets.
Adjustment
a. To retract the joystick, push outward on the inside of joystick.
b. Push the joystick away from front of armrest until it locks into retracted position.
c. To return to forward position, push the joystick forward until it locks into place.
M. ASAP II SEATING ADJUSTMENT
Please refer to the Service Manual for details on how to adjust the seat depth, seat width,
armrest height, and backrest angle.
119832 Rev. A
(Optional) (Fig. 18)
18

joystick

power
module
communication
cable
Joysticks
LED Monochrome
LCD screen
Profile
Mode
On/Off
Omni Display
18
V I I I .
14
15
Color
16
+/-
Navigation
17