Legal Information; Technical Data - Ottobock Lamination Anchors Instrucciones De Uso

3) Allow to air dry in order to remove residual moisture.
7 Maintenance
CAUTION
Failure to follow the maintenance instructions
Risk of injuries due to changes in or loss of functionality and dam­
age to the product
► Observe the following maintenance instructions.
► A visual inspection and functional test of the prosthetic compon­
ents should be performed after the first 30 days of use.
► Inspect the entire prosthesis for wear during normal consulta­
tions.
► Conduct annual safety inspections.
8 Disposal
In some jurisdictions it is not permissible to dispose of the product
with unsorted household waste. Improper disposal can be harmful to
health and the environment. Observe the information provided by the
responsible authorities in your country regarding return, collection
and disposal procedures.

9 Legal information

All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on
medical devices. The CE declaration of conformity can be down­
loaded from the manufacturer's website.
9.3 Warranty
The manufacturer warrants this device from the date of purchase. The
warranty covers defects that can be proven to be a direct result of
flaws in the material, production or construction and that are reported
to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be
obtained from the competent manufacturer distribution company.

10 Technical data

Lamination anchor, three-arm
Reference number 4R41
System height [mm]
Weight [g]
Material
Max. body weight
[kg]
Reference number
System height [mm]
Weight [g]
Material
Max. body weight
[kg]
Lamination anchor, four-arm
Reference number
Weight [g]
System height [mm]
4R42 4R42=1
39 -5 -5
170 130 125
Stainless steel
125 150 136
4R43
8
95
Stainless steel
125
4R111 4R111=­ 4R111=T 4R116
N
155 80 165
44 13 2
4R42=5
-5
125
136
4R89
-3
180
125
165
13
19