Terminating The Charging Process - Herth+Buss eBlow Instrucciones De Operación

Operating Instruction
The vehicle will automatically
perform the following steps:
The vehicle interlocks the charging
connector.
The vehicle reports to the charging system
that it is ready for charging. The LED with
the car symbol lights up green.
The charging process begins.
The duration of the vehicle charging
process is dependent on the charging
current and battery capacity.
23
95960021 | -022 | -023

4.5 Terminating the Charging Process

Terminate the charging process from the
vehicle (e. g. using the key-based remote
control or the STOP button in the vehicle).
Disconnect the charging connector
from the electric vehicle.
Pull the plug (e.g. SCHUKO®, CEE) out of
the wall socket.