How To Assemble (Step 1, 2, 3) - Thane Fitness AB-DOer PRO Manual Del Propietário

HOW TO ASSEMBLE
Before beginning lay out all parts and hardware in a clear area. Put all packing material back into the box.
Familiarize yourself with all the parts and assembly by carefully reading the instructions before you do anything else.
If you are missing a part please call customer service at 1-888-367-6206 (US Customers Only).
34
25
32
UPRIGHT
ASSEMBLY
14
STEP 1
Unfold the UPRIGHT ASSEMBLY to an upright position by pulling out the PULL PIN (10) located to the rear
of the SEAT FRAME (14) then swing the UPRIGHT ASSEMBLY up and lock in position by reinserting the
PULL PIN. Pull out the PULL PIN (10) on the SPRING SET (34) and lock the MASSAGE ROLLER
BRACKET (32) into position with the pin.
STEP 2
The ARM BAR (22) has been attached in the upside-down position to save space in packaging. Pull out the
PULL PIN (10) on the CONNECTION BUSHING (25) and turn the ARM BAR (22) 180˚ to make the LOCKING
KNOB (27) face to the backside. Secure the ARM BAR (22) with the PULL PIN (10).
NOTE: You can adjust the position of the MASSAGE ROLLER (28) and ARM BAR (22) to fit your body size.
STEP 3
The ARM BAR (22) can be locked in any angle by loosening the LOCKING KNOB (27). Roll back the foam
at the end of the ARM BAR (22) to reveal the holes and attach the HANDGRIPS (19) onto both ends of the
ARM BAR (22) WITH THE PHILLIPS HEAD BOLT (21).
OWNER'S MANUAL • MANUAL DEL PROPIETARIO • GUIDE DE L'UTILISATEUR
10
10
22
28
10
27
34
32
19
21
6
21
10
22
19