Set Up - Led Light (If Provided); Set Up - Laser Indicator (If Provided) - Corghi CompactLine EM 9250 Manual De Uso

15.11. SET UP - LED LIGHT (IF
The machine allows the operator to disable or modify the lighting mode.
Proceed as follows to make these settings:
- press the button
- use the
- press the key to confirm
- use the
- press the key to change the setting:
LEd oFF to disable the lighting device
or LEd 1 to activate the lighting device when acquiring dimensions during an
ALU1 P or ALU2 P balancing programme, at the end of a spin cycle in
the case of residual unbalances for 30 seconds, in CP (centred position)
for an additional 30 seconds
or LEd 2 in this configuration, the light will turn on, in addition to the situations
indicated above (in the Led1 mode) also during the entire measure-
ment cycle, when acquiring dimensions in all balancing programmes
and in the Hidden Weight programme when selecting the two planes
behind the spokes.
- press the key to confirm and exit.
15.12. SET UP - LASER INDICATOR
The machine allows the operator to enable or disable the laser device.
Proceed as follows to make this setting:
- press the key
- use the
EM 9250 CompactLine Operator's manual
AVAILABLE)
keys to search for SEt UP
keys to search for LEd 1 (LEd 2 or LEd oFF if previously set)
(IF AVAILABLE)
keys to search for SEt UP
UK
111