Unbalance Optimisation Programme "Opt - Corghi CompactLine EM 9250 Manual De Uso

Programme activation is indicated by the illumination of the LED
panel.
- Use the
1 small
2 medium
3 large
OFF deactivates the programme;
- Confirm with the
- Apply two new counterweights in the positions indicated.
In the motorcycle balancing programmes, the weight division operation can be per-
formed on both balancing sides.
12. UNBALANCE OPTIMISATION
This procedure minimises any vibration still present on the vehicle while running even
after accurate balancing, thus minimising the rim-tyre coupling run-out.
Based on our experiences, the programme can be recalled every time it is convenient to
minimise the running noise produced by the vibrations mentioned above.
The calculations performed by this programme are based on the unbalance values measured
during the last spin performed which must therefore refer to the wheel being serviced.
• Press the key.
• Use the
• Press the key to activate the optimisation procedure.
Programme activation is indicated by the illumination of the LED
EM 9250 CompactLine Operator's manual
keys to select the spoke width
key.
PROGRAMME "OPT"
keys to search for OPt.
on the display
on the display panel.
99
UK