Power Supply - Linde Safety Guard Manual Del Usuario

3
Operating devices and display elements
Safety Guard display unit - Truck Unit

Power supply

The LED indicates the operating status of the
display unit:
LED flashes green:
●
Display unit is ready for operation.
LED flashes red:
●
The display unit has registered an error.
The display unit is in programming mode.
LED lights up red:
●
The display unit has registered an error.
The display unit is in programming mode.
Number of persons in the warning zone
The display indicates the number of people in
the warning zone. The display ranges from
0 - 9 people. If the display flashes, there are
more than nine people in the warning zone.
Warning zones
The LEDs for the warning zones indicate
whether there are people in one of the warn-
ing zones. If there are people in the warning
zone, the LEDs flash in a constant rhythm.
The following operating statuses are possible:
Three LEDs flash red:
●
A person is in the extended area. The LEDs
indicate the direction from which the person
is approaching.
Three LEDs flash orange:
●
An industrial truck with a truck-to-truck sen-
sor or a communication unit is located in the
extended area. The LEDs indicate the di-
rection from which the industrial truck is ap-
proaching.
Multiple LEDs flash red:
●
There are several people in the extended
area. The LEDs indicate the direction from
which the people are approaching.
This function must be switched on in the
configurator.
Multiple LEDs flash orange:
●
14



Operating Instructions - 3008011701 EN - 11/2019
LSG_0026
1
LSG_0024
LSG_0031