Installation; Putting On The Interactive Warning Vest - Linde Safety Guard Manual Del Usuario

Idiomas disponibles

Installation

Putting on the interactive warning

 Remove the charged power bank (1) from

the charging station (2) and switch the pow-

The Statusanzeige (4) lights up orange and

shows the charge state.

 Insert the power bank into the pocket on the

bottom right (3) and connect it with the USB

cable provided for this purpose.

 Insert the mobile warning unit (1) into the

designated pocket (3) with the rear side fac-

ing outwards and upwards and connect it

with the USB cable (4).

The LED (2) on the rear of the mobile warning

unit lights up green and the light conductors of

the active warning vest light up to 40% of the

nominal capacity.

 Close the pocket with the hook and loop

fastener and put on the interactive warning

The warning vest is ready for operation as

long as it is being worn. If the warning vest is

removed and no longer moved, the mobile

warning unit switches off. This reduces the en-

ergy consumption.

Operating Instructions - 3008011701 EN - 11/2019