Linde Safety Guard Assistance System; Installation Report; Functional Description - Linde Safety Guard Manual Del Usuario

1
Introduction

Linde Safety Guard assistance system

Linde Safety Guard assistance system
The Linde Safety Guard is an assistance sys-
tem for the detection of and warning about
dangerous situations in the working environ-
ment of industrial trucks.
Components
As standard, the assistance system contains
the following components:
Safety Guard display unit
●
Safety Guard portable warning unit
●
Safety Guard sensors
●
Safety Guard inductive charging station
●
Other components and functions can be add-
ed to this version:
Fifth Safety Guard sensor:
●
For warnings between industrial trucks
Safety Guard communication unit:
●
As an alternative to the display unit
Safety Guard communication unit from
●
10/2019
Communication unit in a new housing with
CAN bus
Static warning units:
●
For warnings at points that are difficult to
see
Safety Guard zone radio module:
●
For setting up zones in which a truck re-
sponse must be triggered, e.g. a speed re-
duction
Safety Guard active warning vest:
●
Warning vest with LED light conductors and
integrated mobile warning unit for improved
detection of persons.
NOTE
The power supply unit with the appropriate
truck plug for the radio module is available
separately.
 Contact your service partner.

Functional description

The Linde Safety Guard is a wireless assis-
tance system for protecting people and ob-
2
jects in defined danger areas in industrial envi-
ronments.
The system wirelessly measures the distance
between the component mounted on the in-
dustrial truck, components at fixed positions in
the working area and the mobile components
that individuals carry on their person.
In this way, the assistance system can effec-
tively use LED displays, warning sounds and
vibrations to warn people of danger and help
to avoid potential collisions with industrial
trucks. Workplace safety is increased as a re-
sult. However, this does not exempt the driver
and all people in the work place from their due
responsibility and duty of care. Drivers and all
other people must ensure that they are behav-
ing in a safe manner in all situations.
For an early and effective warning, the Safety
Guard display unit has two warning zones.
The extended area can be configured in such
a way that it covers a cone-shaped area to the
front and rear. Within this area, the direction
towards people with a mobile warning unit is
displayed. The immediate vicinity covers a cir-
cular area immediately around the industrial
truck.
The size of the areas can be configured and
must be adapted to the work environment be-
fore initial commissioning.

Installation report

The installation report is an agreement be-
tween the operating company and the service
partner.
The report contains all framework conditions
plus details of the configuration of the system
and any adaptations made to the work envi-
ronment.
The installation report is distributed as a form
along with the technical documents. Once
commissioning is complete, the Linde Safety
Guard system is fully documented.
Operating Instructions - 3008011701 EN - 11/2019