Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the mobile warning unit
Switch on the mobile warning unit. To do
this, push and hold the push button (2) for
one second.
The mobile warning unit starts. A signal tone
is heard, the LEDs of the warning zones light
up and the device vibrates briefly.
Check the charge state of the battery.
The LED must flash green. If the LED flashes
red, the mobile warning unit needs charging.
Attach the mobile warning unit to the out-
side of your workwear using the clip (1).
DANGER
Risk of accident and personal injury
Incorrect attachment can lead to incorrect radio com-
munications!
Wear the mobile warning unit high on your body.
Wear the mobile warning unit such that it is unob-
structed.
Operating Instructions - 3008011701 EN - 11/2019
1
4
Operation
Installation
2
LSG_0013
LSG_0010
37
Publicidad
Capítulos
