Performing A Functional Test - Linde Safety Guard Manual Del Usuario

Performing a functional test

DANGER
Faulty displays possible!
 Always perform a functional test before starting
work.
NOTE
The warning zones are pre-configured by the
manufacturer. They must be adapted to suit
the local conditions during initial commission-
ing. To do this, contact the service partner.
Functional test of the Safety Guard dis-
play unit
During the functional test, the set warning
zones are checked. Two people are required
for the testing.
 Switch on the industrial truck.
The display unit switches on.
 Switch on the mobile warning unit and at-
tach the unit to your clothing.
 Walk around the industrial truck in a spiral
shape with the mobile warning unit. During
this time, the driver checks the display unit.
During the test run, no fault messages or ir-
regularities must appear on the display unit.
 If necessary, have the warning zones set up
again by the service partner.
Operating Instructions - 3008011701 EN - 11/2019

4
Operation
Pre-shift checks
1 2 3 4
LSG_0034
47