General Safety Instructions; Preparation For Use - Ottobock 170K1-80 Free Walk Instrucciones De Uso

4.2 General safety instructions

CAUTION
Mechanical damage to the product
Injuries due to changes in or loss of functionality
Use caution when working with the product.
►
► Check the product for proper function and readiness for use.
► In case of changes in or loss of functionality, discontinue use of the product and have it
checked by authorised, qualified personnel.
CAUTION
Contact with heat, embers or fire
Risk of injury (such as burns) and risk of product damage.
► Keep the product away from open flames, embers and other sources of heat.
NOTICE
Contact with oils, salves, lotions or other products that contain oils or acids
Insufficient stabilisation due to loss of material functionality
► Do not expose the product to oils, salves, lotions or other products that contain oils or acids.
NOTICE
Contact with saltwater or water containing chlorine/soap, fresh water or abrasive sub­
stances (e.g. sand)
Damage and premature product wear
► Following any contact with the substances identified above, promptly clean the product in
accordance with the section "Cleaning".
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
► Avoid storage in condensing ambient humidity.
► Avoid contact with abrasive substances (e.g. sand, dust).
► Do not expose the product to temperatures below -10 °C (14 °F) or above +60 °C (140 °F)
(e.g. sauna, excessive sunlight, drying on a radiator).

5 Preparation for use

CAUTION
Improper moulding or application
Injuries or damage to the orthosis due to overloading of the material and improper fit of the
orthosis due to breakage of load-bearing components
► Do not make any improper changes to the orthosis.
► Always apply the orthosis according to the information in the instructions.
CAUTION
Incorrect alignment, assembly or adjustment
Risk of injury due to change in or loss of functionality
17