Spark Arrester
6. If carbon comes out of the
exhaust, cover or plug the
exhaust outlet. Wear protective
gloves.
7. Lightly tap on the exhaust pipe
with a rubber mallet while
repeating step 5.
8. If particles are still suspected to
be in the muffler, elevate the
rear of the vehicle 30 cm higher
than the front. See page 91. Block the front wheels to prevent
rolling.
9. Place the transmission in PARK. Repeat steps 5 to 7 until no more
particles are expelled.
10. Stop the engine. Allow the arrester to cool.
11. Reinstall the arrester plug and remove the exhaust outlet cover or
plug.
MAINTENANCE
131